Usb Input; To Play Pictures - Haier HL19R1 Manual Para El Usuario

Operation
A
Press MENU button and
Video menu in PC mode.
B
Press / ENTER button to enter the Video menu
and / button to go up and down to select the
desired option .
C
Press / ENTER button to confirm and
/ button to increase and decrease the level to
adjust the selected option to your preference .
D
Repeat step 2 and step 3 until desired quality has
been achieved.
Mode
Video
Brightness
Contrast
Audio
Color Temperature
PC
Function
Lock
Video
ENTER
PC : Press / button to select and
button to confirm, the PC menu as below:
Auto Sync
Video
H Position
V Position
Audio
Phase
Clock
Function
Lock
PC
ENTER
Auto Sync:
Press /
press button to adjust that automatically
adjusts the available options for the best viewing
configuration.
H Position:
Press /
press / button to adjust the horizontal
position of the picture.
V Postion:
Press /
press / button to adjust the vertical position
of the picture.
Phase:
Press / button and then
press / button to adjust the phase of the
picture.
Clock:
Press / button and then
press / button to adjust the clock of the
picture.
EN-19 TV LCD-TFT Owner's Manual
All manuals and user guides at all-guides.com
/ button to select
Custom
50
50
Adjust / Select EXIT Back
/ ENTER
50
50
50
50
Adjust / Select EXIT Back
button and then
button and then
button and then

USB Input

A
Supporting media and file format: Digital pictures
(.JPG) and digital music (.MP3) files
Due to differences in the file code and file mode, It
is possible that some files cannot be read.
B
Before starting operation, verify USB storage device
is of FAT32 and FAT file system format. At present,
this television does not support NTFS and the file
systems of other format.
C
External card reader supports most digital cards
available in the market. Readable digital cards are
classified according to the property of card readers
and can be connected to mobile hard disks (working
voltage 5.0V, working current not over 500mA).
D
The television operation may be halted due to
excessive rate of information code errors. In such
case, restart the system. Please note - there are many
nonstandard USB mobile devices in the market. If a
nonstandard device is used then an identification
problem may occur.

To play pictures

A
Press USB button on the remote to enter stream
media system.
The system start up takes about 3 seconds. Then
insert the USB drive in the USB input.
1 pic
B
Press / button to select Picture folder.
Press ENTER to enter.
pic P 157.jpg 3264：2448
01/01
01/01