AVS Ventvisor 92385 Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Lower the window & scuff the outside of the
rubber window trim where the visor will attach.
Clean the scuffed area with an alcohol pad.
1
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Deflector
®
Side Visor
Rear Driver Rear Passenger
Side Visor Side Visor
Clean Towel
Remove the tape liner from the rear flange. Peel
back 2" of tape liner from each end of top flange.
rear
flange
2
Page 1 of 2
I - Sheet Number VV07 Rev.A
Scotch Brite Alcohol Pad x2
Pad
Scotch Brite Alcohol Pad x4
Pad
Putty Knife
top flange
free end
front flange