Bluetooth Operation - BoomToneDJ BOOMASTER600 Manual De Uso

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button (2) on the unit or the remote control to select the BLUETOOTH
function "BLUE" and the unit will enter search mode.
2. Activate the Bluetooth function on the external device to be synchronized.
3. Start the device search. The loudspeaker is known as "BOOMASTER600".
4. Select it and enter the password "0000" if necessary.
5. Press the play button on the device on the remote control to start playback.
Select the titles with the NEXT and PREV keys and the Volume with the rotary button, making sure that the volume of
the Bluetooth source (mobile, tablet) is active.
TWS MODE
TWS mode allows you to use 2 BOOMASTER600 speakers in stereo. You need 2 speakers for this.
Put the 2 speakers in Bluetooth mode. Connect to one of the 2 with the device.
After the connection is established, press the Play / Pause button twice. The TWS connection will then be established
with a specific sound.
After pairing, one speaker will be the left channel and the other the right channel (Stereo)
Long pressing the MODE button (2) will cancel the function.
MICROPHONE RECORDING
In USB / TF reading mode and after inserting a USB key (16):
Press and hold the REC button on the remote control to start recording microphones to the USB memory stick.
The current music stops and recording begins when 00:01 is displayed. You can plug in a microphone and record the
sound from the microphone. If you plug the USB stick / micro-SD card into this speaker for the first time, the system
will create a folder.
The REC function only records sound from microphones and never sounds from line input or Bluetooth.
To listen to the recording, press the REC play button on the remote control.
LINE IN MODE
To use this mode, press the mode button (2) until LINE is displayed on the screen.
Then connect a compatible device using a mini-jack cable to input (7) and adjust the volume using (19).
USB/TF OPERATION
Compatible music files: MP3, WMA
11