11. POWER SWITCH ON/OFF
12. Power led
13. Main Volume control knob
14. PLAY / PAUSE
15. Previous Track (Hold to decrease volume of USB)
16. Next Track (Hold to increase volume of USB)
17. DC15V in > to connect to supplied AC/Dc adapter 15V – 4A
18. MIC priority switch > reduce the sound of music when talk in microphone
19. AUX IN > to connect an MP3 ao other applinace with 3.5mm output phone jack
BLUETOOTH OPERATION
1.
Turn on the unit and press the MODE button on unit or on the remote control to
2.
Select the Bluetooth function. "blue" will start flashing on the display, the system automatically enters search
mode.
3.
Activate the Bluetooth feature on the external device to be paired.
4.
Initiate a search for devices. The device shows up as "BOOMASTER400"
5.
Select it and enter the password «0000» if required.
6.
Play now the music from the device
7.
Press the PLAY button on the unit or the ‣ key on remote control, to start playing and the buttons NEXT and
PREV, or the keys and for the selection of songs.
MICROPHONE RECORDING
In USB/TF play mode: Long press on the record key to go into recording mode.
The current sound output will stop and go to mute status. The recording will start when the screen displays 00:01.
You can use a microphone to record. If you connect the USB/TF card for the first time to the speaker, the system will
create a folder.
LINE IN MODE
1. Press MODE button (10) on the unit or on the remote control until ''LINE'' appears on display.
2. You can play music from the connected device (19) and adjust Volume
USB/TF OPERATION
Support music formats: MP3, WMA
1.
USB port: plug and play
2.
TF slot: plug and play
3.
Play/pause: Press to play, press to pause, press again to resume play.
4.
Previous/Next: During play press once to go back to the beginning of the track or to the next track.
5.
Repeat: During play press once to repeat the current song, press twice to repeat all songs.