Medisana MP 840 Instrucciones De Manejo página 21

3.1
Changing the attachments
Func-
The device is equipped with a hexagonal holder for the attachments.
Switch the unit off. To change the attachments, first pull off the part that
tions
is not required. Place the new attachment in the holder and turn slightly
until it clicks into position.
For the smoothing and polishing rolls the holder needs to be used. Place
it onto the device.
llumination
Two LED lights are located at the side of the holder for attachments,
which are illuminated when the device is switched on to illuminate the
grinding surface to be treated.
3.2 The purpose of application for the attachments (in sequence of the
Pedicure
illustration):
and
Fine-grained sapphire disk: For shortening nails by filing in the growth
Manicure
direction. Hold the unit firmly, run the nail along the disk. Only file in one
direction!
Coarse-grained sapphire cone: To remove dry hard skin.
Felt cone: To smooth the edges of the nail and to polish the nail surface.
Needle burr: To carefully remove ingrowing nails and to remove small
dead portions of the nails. Only to be used at slow speed!
Cylindrical burr: To remove hardened nail surfaces.
Flame burr: To carefully remove in-growing nails.
Nail polisher with 2 smoothing and polishing rolls:
Smooth nails: Gently smooth the nail surface by slightly pressing the
smoothing roll onto it for approximately 15 seconds.
Polish nails: Polish the nail surface using light pressure with the
polishing roll.
Creaming afterwards and regular care with the MEDISANA MP 840 con-
tributes to well-cared for hands and feet with soft skin and firm nails with
a stable structure.
5
4
3 Operating
GB
15