Miele DOS-P2 Instrucciones De Montaje página 8

M.-Nr. 09149681
The DOS-S dispensing pump stand fitting kit is suitable for the optional securing of the DOS-G2 dispensing pump
housing for a maximum of 3 dispenser pumps.
Contents:
- Fastenings for the DOS-G2 dispensing pump housing and the spray proofing pump.
The DOS-GP3 dispenser unit (mat. no.: 07569230) contains the following components:
Included parts
No. Mat. no. Designation
1 07569230 DOS-G2 pump housing for max. 3 pumps
3 05573680 Dispensing pump
Parts required for USA version:
Parts required
No. Mat. no. Designation
05759720 DOS-P2 peristaltic pump, USA
07569230 DOS-GP3 Dispenser unit
Parts required for China version:
Parts required
No. Mat. no. Designation
10567550 DOS-P2 peristaltic pump, CN
10567650 DOS-GP3 dispenser unit, CN
Parts required for Russia version:
Parts required
No. Mat. no. Designation
10864740 DOS-P2 peristaltic pump, RU
10864750 DOS-GP3 dispenser unit, RU
Depending on the application, one of the following installation kits is also required:
Additional parts required
No. Mat. no. Designation
09079440 MF01 10-20 multifunction module PW 6xx7 (installation kit – MF01 multifunction module for dis-
pensing pumps 1–6)
09079450 MF02 10-20 multifunction module PW 6xx7 (installation kit – MF02 multifunction module for dis-
pensing pumps 7–12)
09079460 MF03 10-20 multifunction module PW 6xx7 (installation kit – MF03 multifunction module for dis-
pensing pumps 7–11)
09079470 MF05 10-20 multifunction module PW 6xx7 (installation kit – MF05 multifunction module for dis-
pensing pumps 1–3 and water recycling)
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
8 von 26
18.01.2022