Machine Data; Safety Instructions - Ferm ferax FVP-2000 Manual Del Usuario

HOT AIR GUN
The numbers in the following text
correspond with the pictures at page 2
A lways read the instruction for
electrical products carefully before
use. It will help you understand your
product more easily and avoid
unnecessary risks. Keep this
instruction manual in a safe place for
future use.
Contents
1.

Machine data

2.

Safety instructions

3. Using the appliance
4. Maintenance
1. MACHINE DATA
Technical specifications
Voltage
Frequency
Power input
Weight
IP Class
Position I
Air flow
Air temperature
Position II
Air flow
Air temperature
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned
- using the tool for different applications,
or with different or poorly maintainted
accessories, may significantly increase the
exposure level
- the times when the tool is switched off or
when it is running but not actually doing
the job, may signifi cantly reduce the
exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
Ferax
All manuals and user guides at all-guides.com
220-240 V~
50 Hz
2000 W
1.6 kg
IP 20
300 l/min
450 °C
500 l/min
600 °C
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of packing
1 Hot air gun
1 Deflector nozzle
1 Fishtail nozzle
1 Air reducer nozzle
1 Scraper nozzle
1 Paint scraper
1 Instruction manual
1 Safety instructions
Product information
Fig. A
1. Switch
2. Ventilation slots
3. Nozzle outlet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Additional safety instructions
When using electric tools, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock and
personal injury. Read all these instructions
before attempting to operate this product and
save these instructions.
If the electrical cord becomes damaged, it must
be replaced with a special cord. These are
available from the manufacturer or authorised
customer service. The cord must be changed
only by the
manufacturer, an authorised service facility or a
similarly qualified person.
This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instructions
concerning use of the appliance by a person
GB
31