Safety Instructions; Machine Information; General Power Tool Safety Warnings - Ferm HAM1017P Traducción Del Manual Original

HOT AIR GUN
The numbers in the following text correspond
with the pictures at page 2
Always read the instruction for electrical
products carefully before use. It will help
you understand your product more easily
and avoid unnecessary risks. Keep this
instruction manual in a safe place for
future use.
Contents
1. Machine data

2. Safety instructions

3. Using the appliance
4. Maintenance

1. MACHINE INFORMATION

Technical specifications
Voltage
Frequency
Power input
Weight
IP Class
Position I
Air flow
Air temperature
Position II
Air flow
Air temperature
Position III
Air flow
Air temperature
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns
Product information
Fig. A
1. Switch
2. Ventilation slots
3. Nozzle outlet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.

General Power Tool Safety Warnings

220-240 V~
50 Hz
2000 W
WARNING!
0.9 kg
Read all safety warnings and all
IP 20
instructions. Failure to follow the
warnings and instructions may result in electric
250 l/min
shock, fire and/or serious injury.
50 °C
250 l/min Additional safety instructions
50-600 °C
When using electric tools, basic safety
precautions should always be followed to reduce
500 l/min
the risk of fire, electric shock and personal injury.
50-600 °C
Read all these instructions before attempting to
operate this product and save these instructions.
Before using the appliance
• Check the following:
• Make sure the voltage of the hot air gun
corresponds with the power voltage;
• Are the mains lead and the mains plug
in a good state: strong, without ravels or
damages.
• Avoid the use of long extension cables;
• Do not use the appliance under moist
circumstances;
• The metal mouthpiece gets hot. Watch out and
do not touch the metal mouthpiece;
• Prevent damage of the heating element.
Do not lock or block the mouth piece;
3