Features - Team Electronic TeCom-IP3 Instrucciones De Uso

English

Features

> max. tx power
FreeNet : 500 mW
VHF : 5 W
> 16 channels available
UHF : 400 - 470 MHz
PMR : 8 channels PMR 446 MHz
> Bandwidth
FreeNET / PMR : 12.5 kHz
UHF / VHF : 12.5 / 20 / 25 kHz
> 50 CTCSS / 105 DQT-N / 105 DQT-I codes
> Busy Channel Lockout - BCL
> selectable tx power Low / High
> Scan Add/Del
> Squelch 0-9
> DTMF (ANI = code) via PTT-ID
> PTT-IT: BOT, EOT, BOTH
> VOX: On/Off; level; delay
> Tail Eliminate (120° / 180° / 240° / Freq Eliminate Tail)
> Beep Ton (On/Off)
> Time Out Timer - TOT (30/60/90/120/150/180/210/240/270/300s)
> Power Save (1:1/1:2/1:3/1:4/1:5/1:6/1:7/1:8/1:9/1:10)
> Roger Ton (On/Off)
> Voice Annunciation in english
> Alarm tone (On/Off)
> 2 programmable double-function-keys (press shortly, hold long)
functions: None, Monitor, Scan, VOX, Revert, Offline, Power, Priority Scan
Note:
all settings can be programmed with the optional software T-UP31.
By default VOX, DTMF, Roger Tone, Tail Eliminate and TOT are not activated.
The two double-function-keys PF1/PF2 (9) are only programmed with one single
function (Monitor and Scan). To activated/deactivate them, you press the keys shortly.
16
PMR : 500 mW
UHF : 4 W
VHF : 136 - 174 MHz
FreeNet : 6 channels FreeNet 149 MHz
1 - antenna
2 - on/off and volume control
3 - rotary channel selector
4 - microphone
5 - speaker
6 - LED
7 - alarm tone
8 - PTT transmission key
9 - double-function-keys
PF1 and PF2
10 - earphone-microphone connector
11 - battery pack Li-Ion, 1600 mAh
8
9
1
6
5
Engl
3
7
2
4
10
11
17