Blyss KPT-2000B 5203L Manual página 11

6- Press + or - to set the setting temperature of this time period.
to confirm the setting.

7- Press
8- Repeat steps 3 to 7 to set another time period number for the same day.
Up to 6 programs are available for each day of the week.
9- Repeat steps 2 to 8 to set the others days of the week.
- Press P to active the weekly program (the light P is on), or to disable it (the
light P is off).
- After the above setting are completed and P program is working, press
DAY, EDIT,
period.
.When the turn-on time is same as the turn-off time, the appliance is in
stand by mode.
.If the setting temperature is not set, the default setting temperature is 23°C.
.The weekly program is erased when the switch is off.
SET OPEN WINDOW (ONLY by remote control)
- Press to switch on the appliance.
- Press to active the open window mode (the
light is on).
- Press + or - to set the setting temperature for the
open windows function.
- Press to disable the open window mode (the light
The appliance will resume to previous working mode.
.During open window mode, if the room temperature drops from about 5°C
to 10°C in less than 10 minutes, the appliance will stop working and enter
into stand by mode. Press
.If open-window mode and weekly timer program
simultaneously, if the appliance turn off in weekly
time, the appliance is not turned on. If it already
turn on in weekly timer, the appliance working
as the setting temperature under open-window
mode.
and to check the setting time of each day and time
again to switch on the appliance.
11
Quick start
is off).