Electrical Connection - Blyss KPT-2000B 5203L Manual

Installation
IMPORTANT : Please follow the safety advice set out on pages 3 to 4.

ELECTRICAL CONNECTION

- Warning : you need to connect the two conductors of
the supply cable to a connection block in respecting the
polarities as following :
- IMPORTANT : The wires in the mains lead are coloured
in accordance with the following code :
Blue – Neutral
Brown – Live
- The blue wire must be connected to the terminal marked
with an N or coloured black.
- The brown wire must be connected to the terminal marked
with an L or coloured red.
- WARNING : Never connect live or neutral wires to the
earth terminal.
- This product is double insulated and must not be earthed.
If there are any incoming earth cables, they must be
joined together using a suitable connector (not supplied)
and well insulated with good quality insulation tape. This
is to ensure earth continuity throughout your property.
FLEX OUTLET METHOD - METAL FRONTPLATES
Connect the cables as shown in the diagram :
ALL EARTH WIRES MUST BE
SLEEVED AND TERMINATED
TO BACK BOX
from Supply :
Neutral
Live
Earth
to Appliance :
18
L N
E E
L N
Live Neutral