CITRUS JUICER
•
The drive shaft will start rotating automatically once pressure is
applied to the cone. The appliance switches off when pressure on
the cone is lifted.
•
When processing larger quantities of fruit, the filter must be
emptied from time to time as necessary.
•
To collect the juice, place a suitable container under the spout.
Push the spout downwards. The extracted juice passes now
straight into the container.
•
Once the desired amount of juice has been collected, push the
spout upwards again.
•
Ensure the plug is removed from the wall socket after use.
GENERAL CARE AND CLEANING
•
Before cleaning the appliance, remove the plug from the wall
socket.
•
To avoid the risk of electric shock, do not clean the Motor base or
power cord with water, and DO NOT IMMERSE UNIT IN WATER or
any other liquid.
•
Do not use abrasives, do not use solvents harsh cleaning solutions
or hard brushes for cleaning.
•
Except for the power unit and the mains connection, all the parts
can be cleaned
•
with detergent and water or in washing up liquid. Rinse
thoroughly to remove all
•
traces of detergent.
•
Clean the surface of the motor base may be wiped with slightly
damp, lint-free cloth.
•
It is advisable to clean the appliance regularly and remove any
food remains.
•
The attachments should be thoroughly cleaned using warm,
soapy water.
•
Rinse well and wipe them dry.
The following parts can be cleaned in the dishwasher: Protective
cover, Cone, Filter, container.
11