Calibrating The Compass - NIXON DELTA II Manual De Operaciones

4
COMPASS FUNCTIONS CONT...
When the value that you want to set as your current
reference altitude is set, PRESS MODE and this value
will be saved as your Current Altitude

CALIbRATING THE COMPASS*

PRESS MODE to go Compass Calibration
To Calibrate, PRESS the START/STOP button. (4C)
The watch will then tell you to turn 720 degrees. HOLD
the watch flat and turn around slowly for 2 full rotations.
The display will then tell you to STOP and points
to the START/STOP button.
PRESS the START/STOP button to confirm you are done
turning around and the display will read DONE. (4D)
*Note: Your compass only needs to be Calibrated
if you notice that it is noticeably incorrect. Sometimes,
exposure to highly magnetic fields can create incorrect
Compass readings and after such exposure, you will need
to Calibrate the compass. This may also be the case if
you notice that you are mysteriously attracting a lot of
Women...for example if you are a total Chick Magnet.
29