Publicidad
Idiomas disponibles
Idiomas disponibles
Connection to Wireless device:
1. Turn the power switch to the ''on'' position. After 5 seconds, you
will hear a start-up chime.
2. On your device, turn on Wireless to search, device name
MO9062 and connect. For first time use, you may need to enter
the password ''0000'' to connect, newer versions may not need
password and it will connect automatically, when it connected,
the LED will flash slowly.
3. Play audio from your device, you can control the audio from the
unit:
a)Previous track/volume down (3)
b)Pause/Resume play (1)
c)Next track/volume up (2). To change tracks or pause, press
buttons quickly, to adjust volume, hold buttons down until desired
volume volume is reached.
To answer a call:
When a call comes through quickly press to answer (1): The
speaker includes a microphone in the base, you will be able to
hear and speak to the caller through the speaker. Press (1) quickly
to hang up call.
Troubleshooting:
• Wireless cannot connect to device: confirm the speaker is under
searching status and Wireless on your device is turned on.
• No sound: check the volume control on the speaker and check
the volume control on the connected device.
• When the power on the speaker becomes low the star-up chime
will sound every 20 seconds.
• When battery is depleted, it will enter a protection state. At this
time, it cannot be used under charging, charge the speaker fully
before next use.
Specifications:
Rated impedance:
Rated power:
Rated voltage:
Frequency response: 280-16KHz
Sensitivity:
40hm
3W
DC 5V
80db±2dB
Publicidad
