Replacing The Lamp; Technical Specifications - Velleman VTLAMP10 Manual Del Usuario

Lámpara de escritorio con lupa
Ocultar thumbs Ver también para VTLAMP10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
4.

Replacing the lamp

Unplug the device and let the circular fluorescent lamp cool down before replacing it.
The lamp is located behind a plastic diffuser.
1.
Gently bend the stem so that the diffuser points upwards.
2.
Remove the 5 screws [X] holding the plastic diffuser in place. Remove the diffuser carefully and
make sure not to drop the lamp.
3.
Hold the lamp at the plastic ring and disconnect the lamp from the connector. Pull on the connector,
not the cables. Take out the defective lamp.
4.
Install a new lamp (order code LAMP12/10) and insert the connector.
5.
Put the diffuser back and fasten the screws [X].
5.
Maintenance
Unplug the device from the mains and let the lamp cool down before maintenance.
Wipe the device with a moist soft cloth. Do not use abrasive solutions or solvents.
6.

Technical specifications

dioptre ............................................................... 3 + 12 (magnification 1.75 + 4.00)
colour ........................................................................................................... white
colour temperature ...................................................................... cold white 6500 K
colour rendering index ........................................................................................ 85
energy consumption Ec ..................................................................... 12 kWh/1000 h
intensity ..................................................................................................... 720 lm
power consumption ........................................................................................ 12 W
cable length ................................................................................................. 1.2 m
power supply .................................................................................... 230 V~, 50 Hz
dimensions
arm length........................................................................................... 27 cm
width .................................................................................................. 18 cm
height ................................................................................................. 39 cm
weight ........................................................................................................ 2450 g
Use this device with original accessories only. Velleman Group nv cannot be held responsible
in the event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 06 – 06/12/2021
VTLAMP10
3
©Velleman Group nv

Publicidad

Tabla de contenido
loading

Tabla de contenido