Kenmore 10478 Manual De Uso Y Cuidado página 12

CONVERSION INSTRUCTIONS
3. Tighten the new orifice to the valve.
Make sure you are using the correct orifice,
marked "1.37". (Fig. 23)
Rear Burner Conversion
1. Remove 5 screws (3/16-24 X 1/2 in.) at the
back of burner box to detach the rear burner
cover from the rear panel of burner box.
During this process, hold the rear burner
cover, otherwise, it will drop and may
break, possibly causing injury. (Fig. 24)
2. Use wrench to remove rear burner orifice
from the rear burner and the hose. (Fig. 25)
All manuals and user guides at all-guides.com
12
1.37
Rear burner
Orifice
Fig. 23
Rear burner
cover
Fig. 24
Hose
Fig. 25