Kenmore 10478 Manual De Uso Y Cuidado página 14

CONVERSION INSTRUCTIONS
Adjust valve control screw
1. Pull all the knobs off of valve stems. Adjust
the screw in the valve hole using the flathead
screwdriver (C). Turn screws two complete
turns (720°) counterclockwise.
(Fig. 28)
2. Press all the knobs back onto valve stems.
3. After all the conversions are complete, return heat diffusers to firebox, followed by the
grates and warming rack.
All manuals and user guides at all-guides.com
14
Valve hole
Fig. 28