Kenmore 10478 Manual De Uso Y Cuidado página 25

CONVERSION INSTRUCTIONS
3. Put the new orifice into the orifice
removal tool (B), and then insert the tool
into the burner opening and tighten the new
orifice to the valve.
Make sure you are using the correct orifice,
which is marked "1.44". (Fig. 54)
4. Replace burner and screws. Make sure
to engage the tube over valve as shown.
(Fig. 55)
Side Burner Conversion
1. Remove the side burner screws
(5/32-32x3/8 in.) to expose the side burner
valve.
Insert the tool onto the valve and unscrew
orifice from end of valve. Put the new orifice
into the orifice removal tool and tighten the
new orifice into the valve.
Make sure you are using the correct
orifice, which is marked "1.31". (Fig. 56)
2. Engage burner tube over valve as shown.
(Fig. 57)
All manuals and user guides at all-guides.com
25
1.44
The sear burner
5/32-32x3/8 in. screw
The side burner
B
Fig. 54
Fig. 55
Fig. 56
Fig. 57