Kenmore 6600 Manual De Uso Y Cuidado página 8

4.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide"
or the display for more information about each cycle.
DRY
senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level. Depending
on model, temperature may be selected on cycle knob or be a
separate control. Choose Normal to save energy. If loads do not
seem as dry as you would like, select More the next time you dry
a similar load. If loads seem drier than you like, select Less the
next time you dry a similar load.
5.
Set cycle settings
NOTE: Not all options and settings are available with all cycles.
Dry Temp
Press the DRY TEMP button to change the drying temperature
setting.
Wrinkle Guard™ feature
Get up to 60 or 150 minutes (for models with two choices)
n
or 90 minutes (for models with only one choice) of heat-free,
periodic tumbling at the end of a cycle. Press the WRINKLE
GUARD™ button to turn ON or OFF at any time before
the cycle has ended.
The WRINKLE GUARD™ feature is preset to "OFF." If
n
selected for other cycles, the WRINKLE GUARD™ feature
setting will remain "ON" the next time that cycle is selected.
8
All manuals and user guides at all-guides.com
AUTO
6.
Press START/PAUSE to begin cycle
Press the START/PAUSE button to begin the cycle.
7.
Remove garments promptly after cycle
is finished
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Guard™ feature to avoid
wrinkling when you are unable to remove a load from the dryer
as soon as it stops.