CAUTION
• During air purification operation, do not touch
top side of the product. (Static electricity may
be generated by anion created from dust
collection ionizer.)
• Do not put metal objects near the appliance.
(Static electricity may be generated by anion
created from dust collection ionizer.)
NOTE
• Air purification single operation is the operation
with low energy consumption.
• During air purification single operation, wind
direction function can be used, but temperature
control function cannot be used.
• During cooling operation or dehumidification
operation, if you want air purification single
operation, press
the product, and press AIR PURIFY button.
• Ionizer and filter components may be different
for each model.
Checking Overall
Cleanliness
It displays the indoor cleanliness.
1
Turn the appliance on.
2
During the operation, if you press PM
SENSOR button, you can check the indoor
cleanliness in each level.
Overall cleanliness color display
a
Dust size dust concentration display
b
26
power button to turn off
a
b
• Dust concentration is displayed in unit of
1 within 8~999 μg/
m
referred to the data sheet of the sensor
manufacturer.
• Dust concentration may continuously change
according to the change of the indoor
environment.
• Overall cleanliness color is displayed based
on the highest contamination level among fine
dust(PM10), ultra fine dust(PM2.5), and super
ultra fine dust(PM1.0).
• Overall cleanliness color is displayed in 4 levels
according to the indoor contamination level.
• If dust concentration is high, the difference
between the displayed dust concentration and
the actual dust concentration may become
bigger.
Super
Color
Level
ultra
fine dust
(PM1.0)
Green
Green
12 or less
(Good)
Yellow
Yellow
13 - 35
(Normal)
Orange
Orange
36 - 55
(Bad)
Red
Red
(Very bad)
or more
. Dust concentration
3
Display standard (μg/m
)
3
Ultra fine
dust
dust
(PM2.5)
(PM10)
12 or less
54 or less
13 - 35
55 - 154
36 - 55
155 - 254
56
56
or more
or more
EN
Fine
255