Installation Instructions; Installer Setting - Setting Address Of Central Control; Installer Setting - Checking Address Of Central Control - LG CEILING CASSETTE Manual De Instalación

INSTALLATION INSTRUCTIONS

Installer Setting - Setting Address of Central Control

˚C / ˚F (5 s)
(3 s)

Installer Setting - Checking Address of Central Control

1
When FUNCTION button pressed, press RESET button
2
Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display
the set address in the display window.
- The address display time and method can differ by the indoor unit type.
3
Reset the remote controller to use the general operation mode.
1
With the MODE button pressed, press the RESET button.
2
By using the temperature setting button, set the indoor unit address.
- Setting range : 00 ~ FF
Group No.
Indoor Unit No.
3
After setting the address, press the ON/OFF
button toward the indoor unit 1 time.
4
The indoor unit will display the set address to complete the
address setting.
- The address display time and method can differ by the
indoor uint type.
5
Reset the remote controller to use the general operation
mode.
INSTALLATION INSTRUCTIONS
15