Classic Accessories 52-002-010401-00 Instrucciones página 6

INSTALL THE LOWER MOUNTING POSTS (fIG. 3)
3. Insert lower mounting posts [K1, K2] into mounting post
clamps as shown. Snug but do not fully tighten. Leave the
nuts loose for final adjustments of the mounting posts.
(Fig. 3)
INSTALL THE UPPER MOUNTING POSTS (fIG. 4)
4. Insert upper mounting posts [J1, J2] into lower mounting
posts as shown. (Fig. 4)
Do not tighten set screw at this time. See step 6.
6
K
fig. 3
P
fig. 4
J