Dell PowerVault Manual Del Usuario página 9

All manuals and user guides at all-guides.com
Updates to the MD3000i Documentation
Hardware Owner's Manual
The following update applies to the Dell™ PowerVault™ MD3000i RAID
Enclosure Hardware Owner's Manual:
Under "Best Practices and Recommendations," the note should read:
NOTE:
Use untagged VLANs for your storage needs. VLAN tagging is supported,
but not recommended.
Installation Guide
The following update applies to the Dell™ PowerVault™ Modular Disk 3000i
Installation Guide:
The Modular Disk Storage Manager Resource CD now features an MD3000i
Configuration Utility, which is a unified graphical user interface (GUI) that
facilitates the configuration of MD3000i storage arrays and host server
initiators. This utility assists users by gathering information about arrays via
discovery mechanisms and auto populating fields with the discovered data.
1 You can launch the MD3000i Configuration Utility from the Resource CD
by performing the following steps.
Place the Resource CD in the CD drive. On Windows operating
a
systems:
• If autorun is enabled, Installer will autorun. Select the MD3000i
Configuration Utility option.
• If autorun is not enabled, run setup.bat. Select the MD3000i
Configuration Utility option.
On supported Linux operating systems:
b
• Mount the Resource CD.
• If autorun is enabled, Installer will autorun. Select the MD3000i
Configuration Utility option.
• If autorun is not enabled, run the autorun file. Select the
MD3000i Configuration Utility option.
Information Update
7