Uline H-567 Guía Rápida

H-567, H-3975
ECONOMY TAPE DISPENSER
1. Place dispenser on flat surface. Unroll 5-6 inches of
tape (sticky side down). Pull tape bar up. (See Figure 1)
2. Place tape through tape bar and release tape bar to
trap tape to dispenser. (See Figure 2)
3. Pull tape between roller and triangle notches.
(See Figure 3)
Figure 1
PAGE 1 OF 3
Wiper
Tape Cutting Blade
Tape Roller
Tape (adhesive side down)
Triangle Notch
Spring
Figure 2
A
1-800-295-5510
uline.com
PARTS
OPERATION
4. Begin tape application on the side of the box.
(See Figure 4, A)
5. Glide the dispenser across the surface at the carton
seam - the smoothing roller automatically presses tape
to the package. (See Figure 4, B)
6. Continue down the opposite end to desired length. Tilt
dispenser forward applying pressure on the wiper to
allow serrated blade to cut tape. (See Figure 4, C)
B
Para Español, vea página 2.
Pour le français, consulter les page 3.
Tape Bar Trap
Figure 3
Figure 4
C
0621 IH-567