Publicidad
EN
Problem
Possible cause
The appliance
The steamer
produces no
has not heated
steam.
up sufficiently
(power button
flashes).
Auto shut-
off has been
activated when
the appliance
has not been
used for more
than 10 minutes
(power button
flashes).
Steam trigger
has not been
pressed to emit
steam.
Low water level
in the tank or the
tank is not
inserted
properly.
Steam lock has
been activated
for 10 minutes.
Water leaks
The water tank is
out from the
not inserted
steamer base.
properly.
Solution
Let the appliance heat up
for 90 seconds. When the
appliance is ready for use, the
light turns steady.
Press the power button and
wait for 90 seconds for the
appliance to heat up again.
Press the steam trigger to
activate steam.
Refill the water tank and insert
it properly.
Steam lock feature comes with
automatic release function.
Double tap on the steam
trigger again for continuous
steam ( refer to
Insert the tank properly.
).
93
Publicidad
