Chevrolet Camaro 1997-2002; Chevrolet Cavalier 1995 1999 - Metra 99-3300 Instrucciones De Instalación

Chevrolet Camaro 1997-2002

1. Using the panel removal tool, gently
unclip and remove the radio trim bezel.
2. Remove (2) 7mm hex-head screws
securing the factory radio, disconnect
the wiring, and then remove the radio.
(Figure A)
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A)
Chevrolet Cavalier 1995-1999
1. Open the driver's door and remove the
fuse panel on the end of the dash and
remove (1) Phillips screw.
2. Open the passenger's door and remove
the panel on the end of the dash and
remove (1) Phillips tool.
3. Remove (3) 7mm hex-head screws from
the top of the glove box liner.
4. Remove (2) 7mm hex-head screws from
the top-left corner of the glove box cavity.
5. Extract (1) Phillips screw from the
defroster duct.
6. Remove the duct work and (1) Phillips
screw exposed.
7. Remove the dash pad and (3) Phillips
screws exposed at the top of the radio
trim bezel.
8. Remove the screws securing the radio.
Slide the radio out, then unplug and
remove. (Figure A)
Continue to Kit Assembly
(Figure A)
REV. 1/26/22 INST99-3300
3