XGIMI HALO+ Guia Del Usuario página 11

Remote Control Pairing
Function Description of Remote Control
Focus adjustment
When the function switch at the bottom of the remote control is moved to the
right (Focus), the automatic focus function is enabled. You can adjust the focus
by using the " VOL+/- " button. When the function switch is moved to the left (VOL),
focus adjustment is disabled. You can use the " VOL+/- " button to control the device
volume.
Shortcut key
To access the shortcut key function, briefly press the Settings button "
Automatic Focus Adjustment/Remote Focus Adjustment
When the automatic focus adjustment function is enabled, the frame will be
adjusted automatically when you turn on the device or move it to another location.
You can enable automatic focus by using the switch at the bottom of the remote
control. Move the switch to the right (Focus) so that the "VOL+/-" button can be
used to adjust the frame.
Place the remote control within 10cm of the
device, press" " and "
an indicator light will begin flashing as the
remote control enters pairing mode. Buttons
can be released as soon as flashing begins,
and the connection is successful when a
"Ding" is heard.
If pairing fails, after 30s repeat the above steps.
" simultaneously,
"
7