Learn Scenario - LEGRAND 882 09 Manual Del Usuario

All manuals and user guides at all-guides.com
Operation
This device allows the automatic remote control of a light source when movement is detected in its surveillance area.
The control is transmitted by a radio transmission to a linked receiver during learning of a scenario.
(1) Learning : action of linking products to be controlled simultaneously from a central point.
This linking is performed by applying the scenario learning procedure on page 16.
(2) Scenario : corresponds to all the products (actors) that are linked to a control button.
Key
The indicator lamp The indicator lamp
goes off blinks slowly

Learn scenario

Step 1: Start the learn phase (on the LEADER)
Press LEARN
Step 2: Add an actor to the scenario (on the ACTOR)
Press LEARN
To add a number of products to the scenario, repeat operations
Step 3: Record the scenario (on the LEADER)
Press LEARN
15
The indicator lamp
blinks quickly
Press the command key that is to
control the scenario
Press the command key that is to be
associated with the leader
and for each actor
The indicator lamps of all products go off
The scenario is recorded
16
The indicator lamp
flashes