Reggiani REVIOS Serie Instrucciones Para La Instalación página 10

REVIOS | ENG |
PREPARATION AND ASSEM-
BLY OF THE PROJECTOR
To assemble the projector,
turn the electricity off at
the mains and follow the in-
structions below.
The REVIOS product line consists of pro-
jectors ready for mounting on the Reg-
giani electrifi ed 3-circuit tracks.
To engage the adapter with the Reggiani
3-circuit track (fig.1): observe the correct
direction when inserting adapter
locking lever ; select circuit 1-2-3 in ac-

cordance with the chosen power supply
line .
C
Deciding on the mounting direction of
the adapter results in selection of the
mounting direction of the luminaire. At
this point, the track mounted REVIOS
luminaire can be installed because the
adapter also acts as mechanical support.
ADJUSTMENT OF THE OPTICAL COM-
PARTMENT
Two hands should be used to orient the
optical compartment, holding the bracket
with one hand and adjusting the optical
compartment with the other (fig.2).
The projector is extremely fl exible and
can be adjusted through 356° on the hori-
zontal axis and by +/- 90° (for the FLAT
www.reggiani.net
; turn

2
010
3

3

3
C