Palazzetti TERMOPALEX BX 300 FAST Datos Técnicos página 18

CONTROLLING COMBUSTION
PRIMARY COMBUSTION occurs by the intake
using the knob located at the bottom right of the
• Moving the knob toward + on the RIGHT, you
have more rapid combustion;
• Moving the knob towards - on the LEFT,
combustion will be slower.
Depending on time fro lighting greater will be the
wood, it is advisable to completely the primary air
to adjust the air based on heating needs or how
long you want the load of wood to last.
The fireplace is not suitable for continuous flame
operation.
18
INSTALLATION
HOW TO USE THE DOOR
The opening of the door is obtained by grasping
the handle and pushing it up (Fig. 8.2).
keep the door completely lowered.
Fuel loading is to be carried out with the door
completely open because any other intermediate
positions may cause smoke to come out, or it may
provoke violent combustion resulting in higher wood
consumption. In case of abnormal functioning of
the door, check the lifting mechanisms, accessing
them through the inspection panel.
The sliding and lifting system of the door is handled
by special sleeves that guarantee minimum fricition
and maximum silence. Once a year, make sure the
The sliding system is equipped with a locking mechanism
that keeps the door open only when it is completely
raised. If the door is left in any other position, this will
tend automatically to close.
temperatures.
The door can be opened by swinging it out to clean
the glass.
takes place in two steps
•
• then completely, thus preventing smoke form
coming out into the room.
- 8.1 -
- 8.2 -