Gate Installation - Evenflo Walk-Thru 4461000 Manual Del Usuario

Gate Assembly
C

Gate Installation

Distance between gate frame and door frame should be equal on both sides, and
NEVER exceed 2.75 in. (6.9 cm). If 2.75 in. (6.9 cm) is exceeded, move to the next
C
C
4
A
WARNING
configuration on page 2.
A
3. Push four adjustment bumpers
into the corners of the gate frame
or the frame extension
NOTE: Make sure the adjustment
bumpers are pushed all the way in.
C
4. Position gate
center of opening, making sure
that it is straight up and down
(90º to the floor).
NOTE: Adjustment bumpers
may mark some mounting
surfaces.
NOTE: If not installing gate at
top of stairs, go to step 8.
C
C
A
.
B
on floor in
A