ASROCK B660M Steel Legend Manual Del Usuario página 31

2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2
Socket (M2_1, Key M) supports type 2242/2260/2280 PCIe Gen4x4 (64 Gb/s) mode.
Installing the M.2_SSD (NGFF) Module
C B
No.
Nut Location
PCB Length
Module Type
28
2
3
2
1
A
1 2
A B
4.2cm 6cm
Type2242 Type2260
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Before installing a M.2 (NGFF)
SSD module, please loosen
the screws to remove the M.2
heatsink.
*Please remove the protective
films on the bottom side of the
M.2 heatsink before you install
a M.2 SSD module.
Step 3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
3
C
8cm
Type 2280