Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PAGE 3 OF 12
ASSEMBLY CONTINUED
LEG ASSEMBLY CONTINUED
5. Attach bottom shelf to legs using 4 long bolts and
4 nuts. Bolts should pass through legs, adjustable
feet, and shelf. (See Figure 4)
Figure 4
DESK ASSEMBLY
1.
Set unit upright. Ensure unit is level and tighten
all bolts.
2. Lay top panel on top of the desk. (See Figure 5)
Figure 5
3. Place top shelf on top of the desk and assemble
with 4 small bolts, washers, lock washers, and nuts.
(See Figure 6)
4. Insert plastic cable ring and cover into the top shelf
from the front of the desk.
Figure 6
NOTE: Bottom shelf includes back lip, which will
be facing down at this step.
NOTE: Do not tighten bolts completely
until instructed.
NOTE: Insert bolts through top shelf, top panel
and desk.
0321 IH-4158
Publicidad
Tabla de contenido
