Sinbo SSI 2893G Manual De Instrucciones página 17

3. Storage
* Keep the machine in a dry, cool and ventilated place and away from flammable and explosive objects.
* Keep properly the hood of connecting hole and put it back when pulling out the ironing brush after
the work is done, in order to prevent water and dust away from the connecting hole.
Fault Recovery
FAULT
The machine does not work or
the indicator light of switch is
not lighted
The indicator light is on but there
is no steam
The accessories of ironing brush
are not fastened
Less, discontinuous or no steam
Less volume of steam
Water don't flow into boiler
Water tank deformation
Overflow of water tank
If the problems above are still not solved, inform the professionals and do not dismantle the machine
without authorization.
CAUSE
Power-off or fusion of fuse
The socket is not connected or
plugged in properly
Unfavorable connection of
socket
The power switch is not turned
on
The water in water tank does
not reach the designed water
level
The water tank is not installed
in position
Severe inflection of steam
conduit
Water don't flow into boiler
Unaligned grip
The water in water tank does
not reach the designed water
level
The water tank is not installed
in position
Severe inflection of steam
conduit
Blockage of filter sieve
Blockage of water tank
Blockage of water intake
The water tank is not installed
in position
Used hot water
Cracking of water tank
Breakage of seal ring
- 16 -
SOLUTION
Check and confirm
Connect to the power supply and
ensure the plug is plugged in
thoroughly
Check whether the power socket is
normal or not
Turn on the power switch
Fill water promptly
Install the water tank in position
Straighten the steam conduit
Shaking water tank or re-placed
the water tank
Realign and fasten the snap close
Fill water promptly
Install the water tank in position
Straighten the steam conduit
Wash the clearing plug at bottom
Wash the filter sieve of water tank
Wash the water intake
Install the water tank in position
Replace the water tank
Replace the water tank
Replace relevant fittings