Cleaning And Care; Noise Development; Technical Data - AEG PROFI-FOEN HTD 5584 Instrucciones De Servicio

Commissioning
low of hot air with the hairdressing nozzle.
without losing volume.
attachment by pulling it off and then pushing on the new
one until it clicks into place.
socket.
Setting the Temperature Level ( switch):
Position 1: low temperature
Position 2: medium temperature for gentle drying
and shaping.
Position 3: high temperature for rapid drying.
Setting the Temperature Level (
Position 0: off
Position 1: gentle stream of air
Position 2: strong stream of air
COOL SHOT (Cold Air)
With this switch you can stop the heating
process.
Hold the button down in this position according to the
desired interval length. When the button is released it
returned automatically to the initial position.
Switch-off
position and remove the mains plug from the socket.
Ionisation function –
reducing electrically charged hair
The dryer is also equipped with an ioniser, which when
switched on gives off negative ions with the air that is ex-
pelled. This process helps to protect the hair when it is being
dried while simultaneously helping to improve hair structure,
increase the volume of the hair, produce a silky sheen and
also reduce the static charge of the hair.
This process is particularly gentle for stressed hair.
Turn the hairdryer on by moving the " " switch to the "I
position. The control lamp lights up in green. To turn the
device off, move the switch to "0
Mains Cable
Never tie the cable tightly round the device, as over time
this may result in the cable breaking.

Cleaning and care

WARNING:
socket.
device in water for cleaning purposes. Otherwise this
might result in an electric shock or ire.
CAUTION:
Clean the housing with a soft, dry cloth without additives.
switch):
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.

Noise development

The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
) to the "0

Technical Data

Model: ................................................................................
Power supply: .............................................................230 V~; 50 Hz
Power consumption:............................................................ 2200 W
Protection class: ................................................................................II
Net weight: .............................................................................0.55 kg
The right to make technical and design modiications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
English
29