Function Buttons; Time Zone Setting; Dst (Daylight Saving Time) Setting; Time Setting - La Crosse Technology WS-9412U Manual De Instrucciones

All manuals and user guides at all-guides.com
I. FUNCTION BUTTONS
There are 2 function buttons located on the front of the
Atomic Clock. The function buttons are labeled: SET
and +.
II. TIME ZONE SETTING
1. Hold down the "SET" button for 2 seconds, the de-
fault setting "EST" will flash in the Date LCD.
2. Press and release the "+" button to select the appro-
priate time zone. There are 13 time zones to choose
from:
EST(-5) Eastern Time (default setting)
CST(-6) Central Time
MST(-7) Mountain Time
PST(-8) Pacific Time
ALA(-9) Alaskan Time
HAW(-10) Hawaiian Time
-11
-12
GMT Greenwich Mean Time
-1
-2
-3
ATL(-4) Atlantic Time
3. Press and release the "SET" button to confirm the
time zone setting, and to advance to DST (Daylight
Saving Time) setting.
III. DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default is "On", meaning that the WWVB
will automatically change the time according to Daylight
Saving Time in the spring and fall. For areas that do not
recognize DST changes (Arizona and parts of Indiana)
turn the DST "OFF".
GB
P.6
2. Press and release the "+" button to select the year.
3. Press and release the "SET" button to confirm the
year, and to set the month.
4. The default month "1" will flash. Press and release
the "+" button to select the appropriate month.
5. Press and release the "SET" button to confirm the
month, and to set the date.
6. The default date "1" will flash. Press and release the
"+" button to select the appropriate date.
7. Press and release the "SET" button to confirm the
date, and to set the weekday.
8. The default weekday "MON" (depends on selected
language) will flash. Press and release the "+" but-
ton to select the appropriate weekday.
9. Press and release the "SET" button to confirm the
calendar settings, and to advance to select either ˚F
or ˚C temperature display.
VI. SELECTING ˚F OR ˚C
1. Hold down the "SET" button for 2 seconds (the se-
lected time zone will flash), press the "SET" button
10 more times, until the default "˚F" flashes in the
time LCD.
2. Press and release the "+" button to toggle between
˚F and ˚C.
3. Press and release the "SET" button to confirm the ˚F
or ˚C selection, and exit the Program Mode.
FEATURES & OPERATIONS
I. CHANGING DISPLAY MODE (SECONDS, AND
TEMPERATURE)
There are 2 possible display modes to view the day,
seconds, and temperature. The month & date/ weekday/
indoor temperature is the default.
To change the display:
GB
P.8
1. Hold down the "SET" button for 2 seconds (the se-
lected time zone will flash), press the "SET" button
once more until "On" and "DST" alternate flash where
the Weekday normally appears.
2. Press and release the "+" button to turn the DST off,
as will be indicated by the display of "OFF" in the
time LCD.
3. Press and release the "SET" button to confirm the
DST setting, and to advance to select the manual

time setting.

IV. TIME SETTING
Note: When the WWVB signal is found, that time will
over-ride the manually set time.
1. Hold down the "SET" button for 2 seconds (the se-
lected time zone will flash), press the "SET" button 3
more times, until the hour "12:00" flashes in the time
LCD.
2. Press and release the "+" button to select the hour.
Note: when setting the hour, "PM" will appear to the left
of the hour display, if it is AM nothing will be displayed.
3. Press and release the "SET" button to confirm the
hour setting, and to shift to select the minutes.
4. Press and release the "+" button to select the minutes.
5. Press and release the "SET" button to confirm the
time setting, and to advance to manually set the
calendar.
V. CALENDAR SETTING
Note: When the WWVB signal is found, that date will
over-ride the manually set date.
1. Hold down the "SET" button for 2 seconds (the se-
lected time zone will flash), press the "SET" button 4
more times, until the default year "00" flashes in the
date LCD.
1. Press and release the "+" button. The display should
now show the month & date/ weekday/ seconds.
2. Press and release the "+" button a 2 time and the
display will return to the normal display.
II. INDOOR TEMPERATURE
The Indoor Temperature appears on the right side of the
Date LCD. The temperature is checked every 10
seconds, and updated whenever there is a change.

MOUNTING

Hanging Hole
Foldout Table Stand
There are two possible ways to mount the atomic clock:
• use of the foldout table stand, or
• wall mounting.
I. FOLDOUT TABLE STAND
GB
P.7
GB
P.9