Safety Instructions - BREWFERM BREWER Guía De Usuario

Brewferm Brewer 25 l
EN
057.089.5
Operating instructions
Before use
Please read the instructions carefully. They hold important information for use, safety and
maintenance of the appliance. Keep the instructions in a safe place so you can refer to them later.
Use this appliance only for its intended purpose as defined in these operating instructions.
Follow the safety instructions when using the appliance.

Safety instructions

• Unwind the mains cable completely. Connect the
appliance only to a safe alternating current socket
with a voltage in accordance with the indications
on the label. The mains cable and plug must be
dry. Only plug in the cable when the kettle is in
use. Do not switch the appliance on when there is
no water inside.
• After use, store the machine in a dry place.
• Never pull the mains cable over sharp edges,
do not bend it and do not allow the cable to hang
over the edge of a table or touch hot surfaces;
protect it from heat. Pull the plug, not the cable
to unplug the kettle. Do not use the cable to lift
or move the appliance.
• Only use extension cables that are in perfect
condition and designed for at least 10 A.
• Always make sure your hands are dry when you
unplug the appliance .
• Unplug and stop using the appliance immediately if:
- the appliance or mains cable are damaged;
- the appliance is leaking;
- there is cause for concern that it may
be damaged;
- the appliance is malfunctioning during
operation.
Have the appliance repaired in these cases.
• Place the appliance on a solid and stable base,
away from hot surfaces such as a stove top,
hot plate or an open flame.
• This kettle is equipped with a minimum and
maximum fill level indicator. Do not exceed the
maximum level. Otherwise there is danger of
burns during cooking.
• Caution: The appliance gets hot. Danger of scald
burns due to hot steam escaping. Do not move
the kettle while using it. Beware of hot steam and
condensation when opening the lid.
• Children are unaware of the dangers that can be
caused by electrical appliances. Always keep an
eye on the appliance while using it and keep/
6
store it out of the reach of children.
• Never immerse the appliance in water.
• The kettle is equipped with boil-dry protection;
it will disable itself automatically once the water
has run out during use.
• After using the appliance pull the plug from the
socket and let the appliance cool down. Let the
condensation water fall back into the kettle when
removing the lid.
• Don't move the kettle when it is filled completely,
as it is very heavy. Use the ball valve to drain
the water before transporting it.
• We do not assume any liability for damages
caused by misuse, handling errors or unprofessional
repair. Any warranty is excluded in such cases.
The appliance is not suitable for industrial use.
Operating the Brewferm electric kettle
Turn the thermostat of the Brewferm brew kettle
clockwise to select the desired temperature
between 30 °C [ON] and 100 °C or switch it to the
max. position to select continuous heating.
The indicator light will light up when the heating
element is switched on.
Before use, make sure the thermostat is in the 'OFF'
position. Then fill the kettle and plug in the mains
cable. Next, turn the thermostat up to the desired
temperature. The heating element will be switched
on until the desired temperature is reached, then the
kettle will maintain this temperature.
Continuous heating – achieving a rolling boil
To achieve a rolling boil continuous heating can be
applied by selecting the max. position with
the thermostat.
First use
Clean the kettle and lid thoroughly before using it for
the first time. You can use Chemipro Wash for this.
®