Tool Specifications; Machine Elements; Intended Use; Noise/Vibration Information - Bosch GKS 7 1/4 PROFESSIONAL Manual De Instrucciones

Tool Specifications

Circular Saw
Article Number
Power
Frequency
Amperage 127 V
220 V
No-load speed
Cutting depht at 90°, max.
Cutting depht at 45°, máx.
Spindle lock
Base Plate
Ø Saw Blade diam (máx.)
Mounting hole
Blade thickness, max.
Teeth thickness/ teeth settings, máx.
Teeth thickness/teeth setting, min.
Weight
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these values
can vary.

Machine Elements

1. On/Off switch
2. Lock-off button for On/Off switch
3. Spindle lock button
4. Cutting angle scale
5. Winged screw for cutting angle setting
6. Winged screw for parallel guide
7. Cutting mark, 45°
8. Cutting mark, 0°
9. Parallel guide
10. Retracting blade guard
11. Base plate
12. Adjustment lever for retracting blade guard
13. Sawdust ejector
14. Blade guard
15. Drive spindle
16. Mounting flange
17. Circular saw blade*
18. Clamping flange
19. Clamping bolt with washer
20. Allen key
21. Winged screw for setting
22. cutting depth scale
23. Set of screw clamps**
24. Extraction adapter*
* Not all of the accessories illustrated or described are included
as standard delivery.
** Commercially available (not included in the delivered items)

Intended Use

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre an-
gles to 45° while resting firmly on the work piece.
All manuals and user guides at all-guides.com
[W]
[Hz]
[A]
[A]
[min ]
–1
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
Measured values determined according to EN 60 745.
Typically the A-weighted noise levels of the machine are:
sound pressure level 95 dB (A); sound power level 110 dB
(A). Measurement uncertainty K = 3 dB.
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
in the enclosed booklet or those added in the centre of these
operating instructions must be observed.
SAVE THESE INSTRUCTIONS.
•
•
•
•
•
GKS PROFESSIONAL
060 1546 0..
1.450
50 / 60
11,5
6,6
6.100
66
51
Yes
144 x 301
184 (7" ¼)
16 (5/8")
1,5
2,5
2,5
4,1
/ II

Noise/Vibration Information

For Your Safety
Read all instructions.
structions listed below may result in electric shock,
fire and/or serious injury.
Additionally, the general safety instructions either
When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
power tool is guided more secure with both hands.
Secure the workpiece.
A workpiece clamped with clamp-
ing devices or in a vice is held more securely than by hand.
Take protective measures when dust can develop
during working that is harmful to one's health, com-
bustible or explosive.
Example: Some dusts are regarded
as carcinogenic. Work with dust/chip extraction and wear a
dust mask.
Keep your workplace clean.
ularly dangerous. Dust of light metal can be inflammable or
explode.
Do not work materials containing asbestos.
is considered carcinogenic.
2 .
Failure to follow all in-
The
Material mixtures are partic-
Asbestos
15