Panasonic SC-HC38 Instrucciones De Funcionamiento página 17

3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥ Use a level to ensure both wall mount brackets are
level.
At least 30 mm
‰4 mm
4
Fix the safety holder onto the unit with the screw
(supplied).
{. Screw tightening torque: 50 N0cm to 70 N0cm.
5
Attach the fall prevention cord (not supplied) to this
unit.
All manuals and user guides at all-guides.com
6
‰7.5 mm to
‰9.4 mm
Wall mount bracket
7
Screw
(supplied)
8
Cord (not supplied)
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 5)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
Wall
Drive the safety holder fixing screw (not supplied)
to secure the safety holder onto the wall.
≥ Refer to step 3 for requirements before screwing.
Safety holder fixing screw
(not supplied)
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
Screw eye
(not supplied)
Cord (not supplied)
Safety holder
Fixed to the wall
Wall
17
RQT9746