Usb Playback; Playing Files Stored On Usb Devices; Recording Audio Cd Tracks On Usb Devices - Pioneer XW-NAV1-K Manual De Instrucciones

06

USB playback

Chapter 6:
USB playback
Playing files stored on USB
devices
• This unit may not recognize the USB
device, may not play files or may not supply
power to the USB device. For details, see
When a USB device is connected on
page 36.
• Pioneer does not support that all files
recorded on all USB devices will play or
that power will be supplied to the USB
device. Also note that Pioneer will accept
no responsibility whatsoever for loss of files
on USB devices caused by connection to
this unit.
Press  STANDBY/ON to turn the power
1
on.
The selected input is displayed on the front
panel display.
2 Press FUNCTION to select the USB input.
' ' is displayed on the front panel display.
3 Connecting USB devices.
The Disc Navigator appears automatically.
When a USB storage device is connected to
the USB terminal, remove the USB terminal
cover.
Push the USB terminal cover as shown
1.
on the diagram below.
20
En
All manuals and user guides at all-guides.com
4
press ENTER.
Playback starts.
Recording audio CD tracks on
USB devices
Pull the USB terminal cover.
2.
WARNING
Store the USB terminal cover out of the
reach of children and infants. If
accidentally swallowed, contact a doctor
immediately.
Use /// to select the file, then
• If you press  PLAY, this unit will play
automatically files stored in a USB storage
device.
• Turn the power off before removing the
USB storage device.
• The tracks of audio CDs loaded in this unit
can be recorded on a USB device
connected to the USB terminal. This unit
can not record the other input's sound.
• It may not be possible to record tracks of
audio CDs on a USB device. For details, see
When a USB device is connected on
page 36.