Connections; Connecting Using An Audio/Video Cable; Connecting Using An Hdmi Cable - Pioneer XW-NAV1-K Manual De Instrucciones

02

Connections

Chapter 2:
Connections
• Be sure to turn off the power and unplug
the power cord from the power outlet
whenever making or changing
connections.
• Connect the power cord after all the
connections between devices have been
completed.
Connecting using an audio/video
cable
This unit's rear panel
Audio/Video cable
(include)
To audio/video
input terminals
TV
8
En
All manuals and user guides at all-guides.com
Y
R W

Connecting using an HDMI cable

By using an HDMI cable, digital signals can be
transferred to an HDMI-compatible TV on a
single cable with no loss of picture or sound
quality. After connecting, make this unit's
resolution and HDMI color settings according
to the HDMI-compatible TV. Also refer to the
HDMI-compatible TV's operating instructions.
• HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other
countries.
Note
• When playing a disc or USB storage device
content, this unit can transfer digital
signals by the HDMI OUT terminal. When
playing the other contents, use the audio/
video cable.
• This unit's interface is designed based on
the High-Definition Multimedia Interface
specification.
• When an HDMI-compatible device is
connected, the resolution is displayed on
the front panel display.
• The resolution of the video signals output
from this unit's HDMI OUT terminal is
changed manually. Change the HDMI
Resolution setting (page 26). Settings for
two units can be stored in the memory.