Pioneer XW-NAV1-K Manual De Instrucciones página 37

Additional information
Problem Check
Power is not supplied to Is Err displayed on the front panel
the USB device. display? No power is supplied if
the power consumption is too
high.
Audio CD tracks cannot be Is there enough free space on the
recorded on a USB device. USB device?
Are there 300 or more folders on
the USB device?
Are there already 99 PIONEER
folders on the USB device?
When connected to an HDMI-compatible device
Problem Check
Picture is not displayed. Is the resolution properly set?
Is the HDMI cable properly
connected?
Sound is not produced or Is HDMI Out properly set?
is distorted.
Multichannel audio signals Is HDMI Out properly set?
are not output.
Colors are not properly Is HDMI Color properly set?
displayed on TV screen.
All manuals and user guides at all-guides.com
Remedy
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB
device.
Press FUNCTION to switch to the other mode, then switch
again to the USB mode. (When the input is switched back to
USB, '
If the USB device is equipped with an AC adapter, use the USB
device with the AC adapter connected.
Recording is not possible if there is not enough free space left
on the USB device. In this case, Available USB space is low
is displayed.
Recording is not possible if the USB device contains 300 or
more folders.
Recording is not possible if there are already 99 PIONEER
folders on the USB device.
Remedy
Set HDMI Resolution properly for the connected device
(page 26).
Restore HDMI Resolution to the default setting (720x480p)
(page 27).
Connect the cable securely (all the way in).
With some cables, 1080p video signals will not be output.
Set HDMI Out to LPCM (2CH) or Auto (page 26).
Set HDMI Out to Auto (page 26).
Change the HDMI Color setting (page 26).
' is displayed on the front panel display.)
13
37
En