Basic Functions - ASCOM 9d24 MkII Guía De Referencia Rápida

Basic functions

Make a call
Dialling can be made in the following ways:
• Dial the number and press the Call key
• Press the Call key and dial the number.
• Press a pre-programmed Hot key* or Soft key.
• Open the call list by pressing the Navigation key ,
select the number you want and press the Call key
• Dial a number from the local phonebook.
When the name is shown; press the Call key
• Dial a number included in a message,
see Dial a number included in a message.
• Dial a number from the Central phonebook.
* The alpha-numeric keys can be programmed with a
telephone number.
Answer/End a call
When the ring signal sounds; press the Call key
To end the call, just press the Call key
time is shown in the display.
Turn loudspeaking function on/off
During a call, press the middle Soft key to turn on/off the
loudspeaking function.
Turn audio signals on/off
In stand-by mode a long press on the Mute button changes
between audio signals on/off. The "Audio signals off" icon
indicates a completely silenced telephone.
A short press on the Mute button before answering a call,
silences the ring signal.
Mute the microphone during a call
A press on the Mute button disconnects/connects the micro-
phone. The text "Muted" is shown in the display when the
microphone is off.
Lock/Unlock the keypad manually
Press the Menu key and then the
The "Locked keypad" icon
6
All manuals and user guides at all-guides.com
.
.
.
to answer.
again. The total call
-key to lock/unlock.
indicates a locked keypad.
Change the volume during a call
Press the Volume button upwards to increase the volume,
downwards to decrease the volume.
Charge the battery
Charging is done in a desktop charger or a wall mounted
charging rack. A filled "Battery icon"
charged battery. While in a desktop charger the telephone is
fully operational.
Note: Charging below 0°C will harm the battery and shorten
the lifetime.
Remove the battery
Switch off the telephone before removing the battery. Make
sure the display is blank (telephone is switched off) before
removing the battery.
Correct battery
There are two similar handsets, 9d24 and 9d24 MkII. The bat-
tery for 9d24 does not fit the 9d24 MkII and vice versa. If the
wrong battery type is used, the handset will not work. The
handset or the battery will not be harmed in any way.
To make sure the correct battery is used for 9d24 MkII, check
one or more of the following:
• The article number should be 660087, 660088 or 660121
(EX-version).
• The battery type should be Lithium Ion Battery
• The back plate of the battery should be black
• The label should be marked with "Only to be used in
RAID2-XXXXX"
660XXX. 660XXX
BKB 902 XX/X RXX
Lithium Ion Battery
3.7V 750mAh
> CAUTIONS <
- DO NOT DISASSEMBLE
- DISPOSE OF PROPERLY
- DO NOT EXPOSE TO HIGH TEMPERATURE
- USE ONLY SPECIFIED CHARGERS
- DO NOT SHORT-CIRCUIT
Manufactured by
Ascom (Sweden) AB
Only to be used in RAID2-XXXXX
indicates a fully
YY-WW
(140F/60C)
GB
7