Preparing To Use The Gage / Changing The Battery - Kroeplin C Serie Manual De Instrucciones

Preparing to use the gage / Changing the battery
For the initial use the batteries provided have to be inserted.
To open the battery cover (H) loosen the screws (I) by using the screwdriver provided
and insert the batteries.
Close the battery cover (H) after changing the batteries and tighten the screws (I).
• Insert the battery ensuring correct polarity!
• The batteries provided are not rechargeable!
• Battery type: 2x 1,5V Micro AAA / MN2400 / LR03
(particularly: DURACELL Plus)
• Close battery (H) cover carefully and pay attention to cleanness!
• If the measuring instrument is not used for more than 3 months the
batteries must be removed, as a leakage of the battery could cause
damage to the instrument.
If LOW‐BATT (15)
.
necessary
Switching on:
Press and release „
1x short
Switching off:
Press and hold „
1x long
6
appears in the display a change of the battery is urgently
ON/<0>" key
ON/<0>" key (>2s)
H
I