Preparing To Use The Gage / Changing The Battery - Kroeplin IP 67 Manual De Instrucciones

Preparing to use the gage / Changing the battery

To open the battery cover (H) loosen the screws (I) by using the screwdriver provided and insert
the batteries.
Close the battery cover (H) after changing the batteries and tighten the screws (I).
 Insert the battery ensuring correct polarity!
 The batteries provided are not rechargeable!
 Battery type: 2x 1,5V Micro AAA / MN2400 / LR03
(particularly: DURACELL Plus)
 Close battery (H) cover carefully and pay attention to cleanness!
 If the measuring instrument is not used for more than 3 months the
batteries must be removed, as a leakage of the battery could cause
damage to the instrument.
If LOW-BATT (15)
.
necessary
Switching on:
Press and release „
1x short
Switching off:
Press and hold „
1x lang
30
appears in the display a change of the battery is urgently
ON/<0>" key
ON/<0>" key (>2s)
H
I