Tabla de contenido
Publicidad
6 | English
or surroundings. The heating of the battery charger
during the charging process can pose a fire hazard .
I n case of damage and improper use of the bat-
tery, vapours may be emitted. Provide for fresh
air and seek medical help in case of complaints.
The vapours can irritate the respiratory system .
S upervise children. This will ensure that children
do not play with the charger .
C hildren or persons that owing to their physical,
sensory or mental limitations or to their lack of
experience or knowledge, are not capable of
securely operating the charger, may only use this
charger under supervision or after having been
instructed by a responsible person. Otherwise,
there is danger of operating errors and injuries .
Products sold in GB only: Your product is fitted with
a BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362) .
If the plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug fitted in its
place by an authorised customer service agent . The
replacement plug should have the same fuse rating
as the original plug .
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a mains socket elsewhere .
Product Description and Specifications
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/
or serious injury .
Save these instructions.
Use the battery charger only when you fully understand
and can perform all functions without limitation, or have
received appropriate instructions .
Product Features
The numbering of the product features refers to the
illustration
of the battery charger on the graphics page .
1 Battery*
2 Green battery charge indicator
3 Charging compartment
* Accessories shown or described are not part of the stan-
dard delivery scope of the product. A complete overview
of accessories can be found in our accessories program.
Technical Data
Battery charger
Output voltage (automatic vol-
tage detection)
Charging current
Allowable charging tempe-
rature range
Charging time for battery
capacity, approx .
– 1 .3–1 .5 Ah
– 2,6–3,0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of
your battery charger . The trade names of individual battery
chargers may vary .
Operation
Starting Operation
Observe the mains voltage! The voltage of the
power supply must correspond with the data given
on the nameplate of the battery charger . Battery
chargers marked with 230 V can also be operated
with 220 V .
Charging procedure
The charging procedure starts as soon as the mains
plug of the battery charger is plugged into the socket
outlet and the battery 1 is inserted into the charging
compartment 3 .
Due to the intelligent charging method, the charging
condition of the battery is automatically detected and
the battery is charged with the optimum charging cur-
rent, depending on battery temperature and voltage .
This gives longer life to the battery and always leaves
it fully charged when kept in the charger for storage .
Note: The charging procedure is only possible when
the battery temperature is within the allowable charging
temperature range, see Section "Technical Data" .
Meaning of the Indication Elements
Flashing Battery Charge Indicator 2
The charging procedure is signalled
by a flashing battery charge indicator
2 .
Continuous Lighting of the Battery Charge
Indicator 2.
Continuous lighting of the battery
charge indicator 2 indicates that the
battery is fully charged or that the
Spit Charger
14,4 V / 18 V Li
V
14,4 - 18
A
2,0
°C
0 - 45
45
min
min
75
3 - 10
kg
0,5
/II
Publicidad
Tabla de contenido
