Tripp-Lite PDUMV15C Manual Del Propietário página 6

Features
Line "OK" (Green LED): Indicates that nominal AC power is present with no wiring
faults detected. When this LED is illuminated, AC power is safe for connected
equipment.
* If the Line Fault (Red LED) indicator illuminates, carefully check the AC
receptacle the PDU is plugged into. The receptacle must be tight and
securely grounded. A loose AC receptacle may cause the Line Fault LED to
illuminate. The Red LED indicates the presence of a wiring fault, but does not
indicate the exact nature of the fault. Only qualified electricians should make
necessary outlet repairs.
If the Line Fault indicator illuminates and power is not present at the outlets,
the PDU's surge-suppression components have been compromised as a
result of surge damage. For service, call Tripp Lite Customer Support at
773.869.1234 to remedy the problem or receive instructions about return,
repair or exchange.
6