Brewing Senseo ® Coffee - Philips HD7827 Manual Del Usuario

EnglisH
10
7 Press the on/off button 3.
The light ring around the on/off button lights up to indicate that you have
to flush the machine.
8 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
The light ring around the on/off button starts flashing to indicate that
,
the flushing cycle has started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
During the flushing cycle, the boiler fills itself with water from the
,
water reservoir and cold water comes out of the coffee spout.
During the flushing cycle, the machine produces more noise than
during a regular brewing cycle.
, When all the water in the water reservoir has been used up, the
flushing cycle is finished and the machine switches off.
now your philips sEnsEo
Note: If the machine does not work, repeat steps 1-8. Do not interrupt the
flushing cycle.
Brewing SENSEO
®
tips for the best sEnsEo
- Use fresh water every time.
- Use the SENSEO
®
Marcilla for your SENSEO
Marcilla SENSEO
®
airtight storage container.
- To make sure that the coffee always tastes optimally, rinse the pod
holders, the coffee collector and the coffee spout regularly.
- The SENSEO coffee tastes best if you stir it before you drink it.
®
coffee machine is ready for use.
®
coffee
quality
®
coffee pods that have been specially developed by
coffee machine for a full, round taste.The
®
coffee pods stay fresh longer if you store them in an