VI.MAINTENANCE
This product must be earthed. If the power cord
is damaged,it must be replaced with a manufacturer
recommended power cord.
DO NOT TANGLE THE POWER CORD
REGULAR MAINTENANCE OF THE TREADMILL
STORAGE: Keep your equipment in a enclosed place, away from dust or
humidity. Don't store it neither in a garage or in a indoor backyard, or near the
water. Humidity, dust and water could damage it and have an effect on its
function
Https://www.LikeSporting.com
ELECTRIC CABLE: Make sure that the cable and plug are in perfect conditions.
Electric cables must be away from hot sources
ALIGN AND TIGHTEN THE BELT OF THE TREADMILL
ALIGN THE BELT: Due to its use, the belt can move off
center. If the belt has moved to the left, start treadmill
and increase the speed to 3MPH .Use the 5mm Wrench to
turn the fixed left bolt clockwise or turn the fixed right
bolt counterclockwise. Don't tighten the belt too much in
order to be able to walk. Repeat this procedure until the
belt is properly aligned.
If deviate to the left, then
adjust the screw on the left side
如 果 跑 带 左 偏 ,则 顺 时 针 调 节 左
clockwise or the screw on the right
side anticlockwise.
边 螺 丝 或 逆 时 针 调 节 右 边 螺 丝
If deviate to the right, then
adjust the screw on the right side
如 果 跑 带 右 偏 ,则 顺 时 针 调 节 右
clockwise or the screw on the left
side anticlockwise.
边 螺 丝 或 逆 时 针 调 节 左 边 螺 丝
11