Management; Storage; Transport; Warnings - ARVEN KONTRACT Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62

5 MANAGEMENT

5.1. STORAGE

All the pumps must be stored indoors. in a dry. vibration-free and dust-free environment, pos-
sibly at constant air humidity.
They are supplied in their original packaging and must be kept there until installation.

5.2. TRANSPORT

Avoid subjecting the products to needless jolts or collisions.
The electropumps must never be carried or lifted by their power cables.

6 WARNINGS

6.1. QUALIFIED PERSONNEL

Installation should be performed by skilled and qualified personnel, in possession of the
technical qualifications required by the specific regulations in force.
The term qualified personnel

6.2. SAFETY

- Never let the pump run dry.
The pumps must never be carried, lifted or operated hanging from their power cables.
carried out, could cause damage and accidents

6.3. MOTOR SHAFT ROTATION CHECK

To do this:
-Completely disconnect the pump from the mains.
-Place the pump in a horizontal position.
-Remove the grill
-Reassemble the grill and the conveyor and install the electropump as indicated in
chapter 7.
20
, and operating on the self-
-

Publicidad

Tabla de contenido
loading

Tabla de contenido